- Home
- Double scissor
- Double inground scissor lifts
- 3.6 Tn 3600 Ext [13165] inground
- Configure your lift
Double scissor lifts: 3.6 Tn 3600 Ext [13165] inground
 Loadcapacity |  Net weight |  Current andvoltages |  Motor Kw |  Minimumheight |  Maximumheight |  Pressure |
|---|---|---|---|---|---|---|
| 3,600 kg | 875 kg | 400/230V - 3PH. Three phase | 3 kW | 0 mm | 1,850 mm | 6-8 bar |
- Very much in demand for visual inspections, tyre changes, MOTs, alignment, mechanical, body and paint work…
- Large hydraulic cylinders (greater thrust with lower pressure), manufactured and tested individually in our factory.
- One single electrovalve simplifies the hydraulic diagram.
- Photocell to verify platforms are parallel.
- Fully reversible lift in the direction of the load.
- Double safety system: pneumatic/mechanical and hydraulic.
- Safe to use with a foot protection system with automatic stop at 12 cm from the ground.
- Sliding extension that prolongs the runway up to 2,110 mm, enabling work with vans.
- Except when limited due to the thickness of the ground, it is not advisable to install this model inground as inground installation provides a greater robustness.
Our advantages: Watch video
- Minimum height for double scissor lifts
- Solidity
- Quality and safety of the hydraulic system (double scissor lifts)
- Simplified electric system
- Automatic bleeding
- Runway extensions
- ISO 9001 quality certifications and IQNet
- European regulation EN 1493:2010 and the directive 2006/42/EC
- Manufacturer endorsement
Minimum height for double scissor lifts
- The minimum height of 105 mm of the EVO onground range is ideal for sports or low profile vehicles.
Solidity
- Very robust structure and base, manufactured based on "solid tread".
Quality and safety of the hydraulic system (double scissor lifts)
- Cylinders manufactured and checked one by one in our factory. Five-year guarantee for the hydraulic system (consult conditions).
- Double hydraulic system with 4 cylinders crosswise (2 master + 2 slave, independent).
- Our EVO range does not require compressed air.
Simplified electric system
- Simplified and reliable electric system that does not required circuit boards.
Automatic bleeding
- Automatic bleeding with a button on the console.
Runway extensions
- Sliding extension integrated in the runway (EVO II and DT 3600 EXT).
- Mobile access ramps that act as extensions (EVO III R).
- They increase the length of the runway to adapt to different vehicle lengths.
ISO 9001 quality certifications and IQNet
In addition to manufacturing with the highest quality standards ISO 9001 since 1999, our lifts are standardised by the most prestigious certification bodies: Aenor, IQnet, Bureau Veritas and TüV Nord.
European regulation EN 1493:2010 and the directive 2006/42/EC
Our lifts exceed the standardisation requirements in design quality, materials, manufacturing processes, maintenance and optimum, safe and controlled operation of the lift.
Each of our lifts includes an identifier of the valid EC declaration of conformity that states that the product complies with the essential European standards and requirements in health and safety in conjunction with its instruction, revision and recommended maintenance books.
Manufacturer endorsement
The main automobile manufacturers have endorsed Cascos lifts and placed their trust in them for their factories and networks of dealers.
