Posts / SlenderTec

Our SlenderTec profiles, specially designed and hot-rolled, enable us to build lifts with narrow posts that are more resistant to torsion and flexion than other lifts made with folded sheet metal and similar materials.

The SlenderTec technology makes our posts impossible to deform, always looking like they did on the first day.

• 
• 
• 

• slender tec pdf (LOGO_SLENDERTECPDF)

Working width

Thanks to our high resistance SlenderTec post, our lifts provide  the largest working distance between posts from 2,700 mm to 3,000 mm. occupying as little space as possible in your garage.

This large interior space also provides comfort while working, with optimum door opening for getting into and out of the vehicle.

• 
• 

Wide range of arms

• At Cascos, we provide a wide variety of arms for our lifts. It is possible to choose between symmetrical (4 arms the same, double or triple), or asymmetrical (2 double arms + 2 triple arms) lifts.
• We have low profile arms that enable vehicles to be lifted from a minimum distance from the ground (from 84 mm).

• 
• 

Arms/Reversibility

The ample space between posts, thanks to the SlenderTec profiles, makes it possible to use symmetrical arms (double or triple) that, unlike asymmetrical arms, allow vehicles to be lifted in both engine position directions, without hindering door opening, and ensuring the vehicle is perfectly balanced.

This lift is fully reversible, so it can be adapted to any space and task to be performed, regardless of its proximity to an energy source, light or possible architectural barriers.

• 

Arms/safety

MAXIMUM STANDARDISED LOAD IN ANY POSITION

Our lift is designed to withstand the maximum load at any angle of the load or length or extension of the arms.

In addition, our arms have safety systems with threaded rods, that provide greater positioning possibilities under the vehicle, facilitating the placement at the fixing point.

• 
• 
• 
• 
• 

Spindle

The diameter of our spindle is 45 mm, the largest on the market. This dimension causes less friction and, therefore, less wear of "nut-spindle" assembly.

Our spindles are cold-rolled not cut. This process accredits their higher quality and useful life than those of other manufacturers. The spindles are checked one by one before assembly.

In addition, they are suspended by gravity and do not rest on anything, and are thus perfectly centred.

• 
• 

Carriages

The carriages are equipped with four high quality steel bearings, reinforced with Nylatron pads for better guidance and less wear than Nylon guides.

• 
• 

Exclusive details

All our lifts come equipped with some exclusive details:

• 4 tool trays.
• Rubber guards on posts for opening doors.
• Protection of the spindle that prevents the operator getting dirty by touching the column.

• 
• 
• 
• 

R&D&I

Our lifts are designed to be leaders in reliability. For this purpose our R&D+i department seeks maximum simplicity and robustness in its designs, from both electrical and mechanical perspectives.

For CASCOS, technology must aid reliability, developing  ingenious designs that reduce the risk of breakdowns, but that also facilitate  quick repairs.

Nuts

The nuts are specially designed to be long-lasting and are manufactured from high quality materials: RG7 bronze and Nylatron.

Thanks to our spindles with the largest diameter on the market (45 mm), the nut suffers less wear and less friction and is therefore more durable and needs less greasing.

• 
• 
• 

Lift more vehicles with your Cascos lift

• Our wide range of spindles, wedges and brackets available both as standard (fitted in the factory) or as optional extras allow you to increase the versatility of our lifts so that your garage can work with more types of vehicles.
• We will advise you at the time of purchase to help you choose the ones that best meet your needs.
• If you already have a Cascos 2 post lift and you want to work with more types of vehicles, you can consult our optional spindles, wedges and brackets or contact your usual distributor.

• 

• See accessories: Optional spindles, wedges and brackets

ISO 9001 quality certifications and IQNet

In addition to manufacturing with the highest quality standards ISO 9001 since 1999, our lifts are standardised by the most prestigious certification bodies: Aenor, IQnet, Bureau Veritas and TüV Nord. 

• 
• 
• 
• 

• UNE-EN ISO 9001:2008 ER-0557/1999
• IQNet International Organization for Standardization
• Bureau Veritas
• TUV NORD Certification
• Quality Policy CASCOS MAQUINARIA, S.A. UNE - EN - ISO 9001:2.015.

• AENOR-ISO 9001:2008 ER-0557/1999 (CERTIFICADO_ISO_9001-2015_CASCOS_MAQUINARIAPDF)
• IQNet International Organization for Standardization (CERTIFICADO_IQNET_CASCOS_MAQUINARIAPDF)

European regulation EN 1493:2010 and the directive 2006/42/EC

Our lifts exceed the standardisation requirements  in design quality, materials, manufacturing processes, maintenance and optimum, safe and controlled operation of the lift.

Each of our lifts includes an identifier of the valid  EC declaration of conformity that states that the product complies with the essential European standards and requirements in health and safety in conjunction with its instruction, revision and recommended maintenance books.

• 

• Member of AFIBA (Spanish Association of Manufacturers and Importers of Equipment for Automotion)
• AFIBA member of EGEA (European Garage Equipment Association)
• Legislation on machinery in the European Union
• European regulations: Machinery Directive 2006/42/EC – Edition 2.1 (dated July 2017)

Manufacturer endorsement

The main automobile manufacturers have endorsed Cascos lifts and placed their trust in them for their factories and networks of dealers.

• 
• 
• 
• 
• 
• 

Collaboration

Cascos collaborates on projects with internationally recognised manufacturers and organisations, which demonstrates their confidence in our lifts.

• 
• 
• 
•